2 inch USB Arcade Trackball LED Blue Ball Compatible With PC Mame Pi

Trackball works great. Its plug and play. Lights up a nice blue. Would recommend.

This is a good addition to the gaming experience! Centipede is now fun again!



This trackball is not exactly like the arcades but, for the price, it does a great job.



The first one I received was bad, but Shane got me a replacement ASAP. Thanks for the great support!

Compact, space saver, well built trackball. I like this better then Genn's trackball as it's less jittery.

Nice compact led track ball for small spaces on control panel. Solid built and jittery unlike Glen track ball that's poorly built.

First off the base and led lights are good quality.

The bad news is the circular caps are made wrong and will cause the trackball to drag. Take the cap off and the mouse will glide freely up down, left right.

The cases are also not white, they are beige.

Two ways you can fix this yourself.

Take a 3 oz WD 40 aerosol can and wrap 1500-2000 gif wet sandpaper. Put it half way on the cylinder and slip the plastic cap onto it. Sand it until you can get the cap on the cylinder 100% then keep sanding. The and retest the result on the trackball, clean the lid first with warm water and dry it with a microfiber cloth so you don’t attract dust into the trackball.

To fix the beige, get Forever Black dye in Amazon. 4!8: is made for cars, use the Forever black cleaner in the cap. Then brush on the black dye. Use rubber gloves unless you like your hands looking like dr. Frankenstein’s experiment.

It comes with bo mounting screws but it can be mounted with two really long screws and these may be hard to find an expensive. Instead use indoor outdoor black rubber mounting tape found at Lowe’s. This stock may no look like it will stick but it is stronger than gorilla glue and can take a ton of force. If needing to unmourned use a dryer or heat gun.

First off the base and led lights are good quality.

The bad news is the circular caps are made wrong and will cause the trackball to drag. Take the cap off and the mouse will glide freely up down, left right.

The cases are also not white, they are beige.

Two ways you can fix this yourself.

Take a 3 oz WD 40 aerosol can and wrap 1500-2000 gif wet sandpaper. Put it half way on the cylinder and slip the plastic cap onto it. Sand it until you can get the cap on the cylinder 100% then keep sanding. The and retest the result on the trackball, clean the lid first with warm water and dry it with a microfiber cloth so you don’t attract dust into the trackball.

To fix the beige, get Forever Black dye in Amazon. 4!8: is made for cars, use the Forever black cleaner in the cap. Then brush on the black dye. Use rubber gloves unless you like your hands looking like dr. Frankenstein’s experiment.

It comes with bo mounting screws but it can be mounted with two really long screws and these may be hard to find an expensive. Instead use indoor outdoor black rubber mounting tape found at Lowe’s. This stock may no look like it will stick but it is stronger than gorilla glue and can take a ton of force. If needing to unmourned use a dryer or heat gun.

The trackball works s expected. The soft blue glow of the ball looks great. The only drawback is the light is not switched. It is on whenever the USB is plugged in, even when the pc is powered down

The trackball works s expected. The soft blue glow of the ball looks great. The only drawback is the light is not switched. It is on whenever the USB is plugged in, even when the pc is powered down

works great but the LEDs are blue when they could have been white so i could change out the ball for a diffrenet color to get a new look

works great but the LEDs are blue when they could have been white so i could change out the ball for a diffrenet color to get a new look