Available M-F 9am to 5pm
Available M-F 9am to 5pm
4.5 / 5.0
10 Reviews
This cable witll connect to a sanwa style joystick and to Arcade1Up board that has a 5 pin style connector. This makes a plug and play solution for...
View full details5.0 / 5.0
27 Reviews
See Wave Information To Know what panel you need to order. Most common is Wave1/2 Direct replacement for Arcade1Up machines Made from Baltic birc...
View full details4.95 / 5.0
226 Reviews
This is a complete kit to convert a VERTICAL Arcade1Up machine like Pac-Man or Galaga over to a 60 in 1 jamma based setup. This is a 90% compete ki...
View full details5.0 / 5.0
2 Reviews
See Wave Information To Know what panel you need to order. Most common is Wave1/2 Direct replacement for Arcade1Up machines Made from Baltic birc...
View full details5.0 / 5.0
3 Reviews
See Wave Information To Know what panel you need to order. Most common is Wave1/2 Direct replacement for Arcade1Up machines Made from Baltic birc...
View full details5.0 / 5.0
27 Reviews
Color Options Red | Blue | Yellow | White | Green | Orange | Purple This is a complete control deck upgrade kit for the Galaga Arcade1Up machine. T...
View full details4.84 / 5.0
25 Reviews
Plexiglass for Our A1U control Panels. Specs: 1/8 Cast Plexiglass. Will Be Cut To Match The Panel You Are Ordering This Is NOT FOR the A1U factory...
View full details4.66 / 5.0
94 Reviews
Concave Design Microswitch reliability tested to 10,000,000 cycles. Vertical attached microswitch with standard 0. 187" (4. 8mm) terminals. 28mm H...
View full details4.82 / 5.0
22 Reviews
Microswitch Reliability Tested To 10,000,000 Cycles Vertical Attached Microswitch With Standard 0.187" (4.8mm) Terminals 12V or 5V. If you need en...
View full details5.0 / 5.0
25 Reviews
Runs on 5 volt. Button connection Size: 0.110 (same size as standard sanwa) We offer the led harness for these in our store! Convent One Piece Des...
View full details4.74 / 5.0
90 Reviews
Convent One Piece Design, not super long like other style buttons. 28mm Screw Type If you need encoder wires get them HERE
4.94 / 5.0
444 Reviews
🎮 Genuine Sanwa JLF-TP-8YT 5-Pin Joystick – Premium Arcade1Up Upgrade Level up your Arcade1Up cabinet with the real Sanwa JLF-TP-8YT — the same hig...
View full details5.0 / 5.0
3 Reviews
Includes Cable For 412 In 1 To Trackball (specifically made for this) Ball Size: 2" Width: 2-13/16 Length: 2-13/16 Height: 1 3/8 Mounting hardware...
View full details5.0 / 5.0
3 Reviews
Cable length: 36 Inches Supports resolutions at 800x600 (SVGA), 1024x768 (XGA), 1600x1200 (UXGA), 1080p (Full HD), 1920x1200 (WUXGA), and up ...
View full details5.0 / 5.0
8 Reviews
This power cord is the last piece of the puzzle to getting your arcade up and running. Featuring a three foot length, this cable is ideal for any a...
View full details4.58 / 5.0
19 Reviews
See Wave Information To Know what panel you need to order. Most common is Wave1/2 Direct replacement for Arcade1Up machines Made from Baltic birc...
View full details4.84 / 5.0
81 Reviews
Replaces Sanwa Part Number:GT-Y This GT-Y plate is compatible with the Sanwa JLF series joysticks: JLF-TP-8YT(-SK) JLF-TP-8Y(-SK) JLF-TP-8S...
View full details5.0 / 5.0
8 Reviews
Replaces Sanwa Part Number:GT-8F Allows 4 Way or 8 Way Play compatible with the Sanwa JLF series joysticks: JLF-TP-8YT(-SK) JLF-TP-8Y(-SK) JLF-TP-...
View full details5.0 / 5.0
4 Reviews
This cable has a sanwa style connector on one and with preinstalled terminals for the Arcade1Up 4 connector. This comes with the cable and two 4 co...
View full details5.0 / 5.0
37 Reviews
Color Options Red | Blue | Yellow | White | Green | Orange | Purple This is a complete control deck upgrade kit for the Atari 12 in 1 Arcade1Up mac...
View full details4.8 / 5.0
199 Reviews
There are 2 different 4 pin cables for these joysticks. Please look at the images below and determine which cable you need. 1.Double 4 Pin Wave 1/2...
View full details4.97 / 5.0
93 Reviews
Want To Install A Pandora's Box Or Raspberry Pi In Your Arcade1Up? Then You Need This Board!***The days of simple are gone, A1U has too many 17" LC...
View full details5.0 / 5.0
3 Reviews
3.74" Outside Diameter 2.95" Mesh Speaker Grill Size 3.30" Center To Center Hole Mounts ABS Outside Ring Speaker Grill Is Metal Mesh
5.0 / 5.0
3 Reviews
The Harness Will Allow You To Plug A Home Edition Pandora 40 Pin Into Standard 28 Pin Jamma Harness This Is A Plug And Play Cable Length Is Abo...
View full details