Arcade Parts Control Panel

Concave Design Microswitch reliability tested to 10,000,000 cycles. Vertical attached microswitch with standard 0. 187" (4. 8mm) terminals. 28mm H...

Runs on 12 volt. These Fit the Standard 1-1/8" (28mm) Control Panel Button Holes. Button connection Size:2.8mm (same size as standard sanwa) We o...

There are 3 different cables for these joysticks. Please look at the images below and determine which cable you need. The joystick INCLUDES the cab...

Convent One Piece Design, not super long like other style buttons. 28mm Screw Type If you need encoder wires get them HERE

Convert your Japanese style ball top joystick to the more recognized American style. This will work on: Sanwa Zippy Arcade1Up AtGames Legends  

There are 2 different 4 pin cables for these joysticks. Please look at the images below and determine which cable you need. 1.Double 4 Pin Wave 1/2...

Replaces Sanwa Part Number:GT-Y This GT-Y plate is compatible with the Sanwa JLF series joysticks: JLF-TP-8YT(-SK) JLF-TP-8Y(-SK) JLF-TP-8S...

Microswitch Reliability Tested To 10,000,000 Cycles Vertical Attached Microswitch With Standard 0.187" (4.8mm) Terminals 12V or 5V. If you need en...

The 4lb tension spring can be used as a replacement for the existing spring found in the Sanwa JLF series of Joysticks. Modding your Sanwa JLF joys...

Runs on 12 volt. These Fit the Standard 1-1/8" (28mm) Control Panel Button Holes. Button connection Size:2.8mm (same size as standard sanwa) We o...

Runs on 12 volt (will not power on 5v). These Fit the Standard 1-1/8" (28mm) Control Panel Button Holes. Button connection Size:2.8mm (same size...

Plastic push button with translucent bezel Black center for Eclipse look LED holder .250" terminal size Fits wood or metal control panels Pushbu...

One End is a Standard 0.187" (4.8mm) Terminals Other End is a 2 Pin JST Commonly used on Encoders and Arcade1Up 12 Jumpers Per Pack

Runs on 5 volt. Button connection Size: 0.110 (same size as standard sanwa) We offer the led harness for these in our store! Convent One Piece Des...

Runs on 12 volt. These Fit the Standard 1-1/8" (28mm) Control Panel Button Holes. Button connection Size:2.8mm (same size as standard sanwa) We ...

Arcade Quality Buttons! Microswitches included inside the Button! fits in most Hori and MadCatz joysticks Microswitch reliability tested ...

6MM Ball Thread.

The 2lb tension spring can be used as a replacement for the existing spring found in the Sanwa JLF series of Joysticks. Modding your Sanwa JLF joys...

25¢ Push For Credit" graphic embedded inside the buttonMicro switch Reliability Rated at 10,000,000 cycles Package Contents: 25¢ Push Button LED 1...

Fits Small 0.0110" (2.8mm) TerminalsMultiple Lengths Available 12 Packs or Singles

These are replacement bulbs for our Chrome and Eclipse buttons. They will work with either 5v or 12v. Sold each.

Arcade Encoder For Sanwa Style (Complete w/Cables) Fits small 0.110" (2.8mm) Terminals and Sanwa 5 Pin Joystick1 - Arcade Encoder1 - USB Cable13 - ...

  Runs on 12 volt. These Fit the Standard 1-1/8" (28mm) Control Panel Button Holes. Button connection Size:2.8mm (same size as standard sanwa) We ...

This Trackball Is Plug And Play With The iCade 60 in 1 Ball Size: 2.25" Width: 3-13/16 Length: 3-13/16 Height: 1 1/2 Mounting hardware so...