This is a complete kit to convert a VERTICAL Arcade1Up machine like Pac-Man or Galaga over to a 60 in 1 jamma based setup. This is a 90% compete kit. You will still need some odds and ends from your local hardware store. The LCD Driver is NOT packaged in the kit but is needed if you plan to use the factory A1U monitor! A lot replace the monitor so we took it out. The kit includes the following:

1. Three red happs style concave buttons (?)
2. One white happs style player 1 / player 2 concave button (?)
3. Jamma harness specifically made for 60 in 1 with only the required options for the conversion (?)
4. Two 8 ohm speakers (?)
5. 16A power supply (?)
6. EMI Filter (?)
7. 180 watt Amplifier (?)
8. 60 in 1 PCB w/standoffs. (?)
9. Classic Ball Top Joystick (?)
10. Y Cable Splitter (?)
11. EMI Filter Power Cable (?)
12. 5.5mm x 2.1mm Male DC Plug to U Fork (?)
13. US Power Cord (?)
14. 36 Inch VGA Cable (?)
15. 5 Feet of Speaker Cable (not pictured) (?)
16. Small 1/2 Buttons, assorted colors (?)

Parts You May Need But Are Not Included As Not All Machines Require:
1.LCD Driver, please verify your monitor is one of these part numbers: M170ETN01.1 M170ETN01.3 M190ETN01.0 Get driver HERE
2. Optional Trackball: LED or WHITE
3. J Panel for Wave 1/2 machine. Here

Screws You Many Need:
1. You will need 8 x #8 nuts and bolts for the speakers (wave1/2 kits)
2. 4 x #8 x 3/8 screws for joystick
3. 2 x #6 x 3/4 nut and bolt for the emi filter

See the install video:

Power Supply to EMI Filter Power Cable 3 Feet Long

Country

Country