Universal Replacement Arcade Monitor chassis 25" 27" 29" CRT

DIY Retro Arcade

$89.99 
SKU: Arcade-81

Add to Wishlist
 This is a universal chassis that will work with "most" 25"-29" standard resolution CRT CGA monitors Please verify the below to make sure it will work with yours.

1. Your vertical ohms must be 6-12 ohms (typically yellow and green wire coming from yoke). If yours are not in this range this chassis will not work for you.

2. Your horizontal ohms must be over 1.3 ohms (typically red and blue wires). If your monitor does not meet this requirement then you can add in 5 to 10 watt 1 ohm resistor in series to the circuit to increase the ohms over 1.3.

3. The chassis does not have a degaussing connection, you will need to use a degaussing wand.

Monitor chassis carry HIGH VOLTAGE and should only be changed by a professional.

This will not work with mortal Kombat 1-4

Being a electrical part these are 100% checked before they leave here and cannot be returned.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)