60 in 1 Conversion Kit For Arcade1Up Vertical Machines

In stock
SKU
A1U-60-in-1-kit
$119.99

This is a complete kit to convert a VERTICAL Arcade1Up machine like Pac-Man or Galaga over to a 60 in 1 jamma based setup. This is a 90% compete kit. You will still need some odds and ends from your local hardware store. The LCD Driver is NOT packaged in the kit but is needed if you plan to use the factory A1U monitor! A lot replace the monitor so we took it out. The kit includes the following:

1. Three red happs style concave buttons
2. One white happs style player 1 / player 2 concave button
3. Jamma harness specifically made for 60 in 1 with only the required options for the conversion
4. Precut duel speaker panel with 2 holes for service and test buttons.
5. Two buttons for front panel (random colors sent)
6. Two 8 ohm speakers
7. One power supply
8. EMI Filter
9. 180 watt Amplifier
10. 60 in 1 PCB w/standoffs.
11. Classic Ball Top Joystick
12. Y Cable Splitter

Parts You Need But Are Not Included As They Are Pretty Common:
1. If you want to use our premade control deck you can get it HERE
2. LCD Driver, please verify your monitor is one of these part numbers: M170ETN01.1 M170ETN01.3 M190ETN01.0 Get driver HERE
3. Old pc power cable. Who does not have a drawer full of these things ;) If not get them HERE
4. 4 Foot Speaker Wire: HERE
5. Trackball: LED or WHITE
6. VGA Cable: HERE
7. EMI to Power Supply Cable: HERE
8. Small Pig Tail For 12V out At Power Supply: HERE


What else is needed
1. You will need 8 x #8 nuts and bolts for the speakers

 

See the install video:




Write Your Own Review
You're reviewing:60 in 1 Conversion Kit For Arcade1Up Vertical Machines