28 Pins Full Cabinet Jamma Harness (5/6)
- Jamma harness with 2x28pins 56 pin connector that can be used for standard jamma arcade cabinet (machines) and pcbs.
- All wiring uses 22awg ,cheaper harnesses will only use 24awg or 26awg. The problem is if the resistance of wire is too high, it can cause a significant power loss before the dc voltages even reach the jamma pcb.
- Fast connection to power supply with attached terminal forks for all voltages (+5vdc, +12vdc, -5vdc, gnd).
- Video signals connect through included standard monitor connector.
- Full grounding loop for all those joystick/button micro-switches on your control panel.
Write Your Own Review