Skip to content

Arcade1Up Countercade 60 in 1 Conversion Kit Gen2

Original price $129.99 - Original price $129.99
Original price
$129.99 - $129.99
Current price $129.99

This is a 100% full install kit minus the monitor or LCD driver and assorted nuts and bolts.

Kit Contains:

1.  Speaker Grill Cover
2. 3 Jigs
3. Power Supply
4. EMI Filter
5. Three Red Buttons | 2 White Buttons | 2 Small Buttons For Test & Service
6. 35cm "Shorty" 60 in 1 Jamma Harness for Sanwa 5 Pin
7. Genuine Sanwa JLF-TP-8YT 5 Pin Joystick
8. VGA Cable
9. PCB Feet
10. 60 in 1 Jamma Board
11. 5.5 x 2.1mm Paigtail
12. 5.5 x 2.1mm to Micro USB
13. Hardware Pack

Needed tool suggestion
1/8 Drill Bit
9/64 Drill Bit
1" or as big as 1 1/4 Paddle Bit. If you do not want to use a paddle bit you can drill a bunch of small holes and just knock it out. Paddle bits are like 4 bucks at Home Depot!

Install Video:

Customer Reviews

Based on 7 reviews
Works flawlessly!

Amazing kit! Instructional video was super clear on what to do, anyone can do this. A side note if you own the Pac-Man/Galaga double sided countercade - you need to cut into the monitor board a bit for the speaker to fit, otherwise installs just fine like the previous galaga and pac man countercades.


I got into retro arcades just a few months ago. This was my first serious mod. I know nothing about electronics at all. But the 51-minute tutorial breaks it down step-by-step so even a fool like me can do it. These guys are the real deal. I will definitely buy from them again.

The kit itself is amazing, it comes with all the screws, and even jigs for where you cut things. Incredibly thorough.

The buttons and joystick it comes with are great quality too.

I have one small but important complaint: the kit comes with everything you need EXCEPT a power cord. I know you guys sell them, so just add one to this kit and raise the price $4. Or at least let us know we'll need to add one to our shopping cart the way you let us know we need to by the LCD driver separately. When I realized there was no power cord included, I went to Best Buy and Home Depot and neither sells them. I had to order one online.

Also, the video is very thorough but it doesn't show how to replace the LCD driver, and I needed to see that. I know there's a video about how to flip up that little plastic piece, but I am a fool and had no idea that all I had to do was slide the ribbon in there, close that piece, connect it with the white cord to that other piece, and mount it with the tape (which is a great touch) and I'd be done; I had to go down a YouTube rabbit hole to find a video of someone replacing their LCD. If you add that one piece of explanation to the tutorial, there's nothing missing at all.

I am still shocked I got it to work. If I can do it, anyone can.

I modded mine into a Donkey Kong, and used my original control panel (it was a Frogger). I drilled the On/Off and Sound switches into full button holes because there was nowhere else to put the buttons that would fit.

Since we end up with no volume control, the only way to change the volume is with the Test button, or turning the dipswitch 4 on inside the machine, both of which require opening the back. But I came up with a cool workaround: the Test button is exactly the size of the hole that the original power cord came out through the back from, so I mounted it back there (see the second pic below) and now I can get into the Dipswitch settings whenever I want without opening the machine. I didn't have to drill at all.

Cecil Criss
60-1 countercade gen2 kit

The kit works great. Would have gave 5 stars instead of 4 but had parts missing. The dident send the EMI Filter with kit and was missing the screws for joystick. Had to use screws from old joystick. They sent me another emi filter took about a week but they dident send the plug wire to plug between emi and power supply. Had to make one. Other then that great kit.

Nhat Nguyen
Good quality parts and great communication!

I liked that as my control panel was being completed, I was getting a quick note sent to update me. This was my first purchase from this company, but it won't be my last. They also helped me when I got stuck during the build and now everything works great. Thanks!!

Wayne S
Arcade1up gen 2, 60 in 1 upgrade kit

This is a great kit, I love all these games. They are what I grew up with. The rendition is really good. This kit is well put together and easy to install. I would highly recommend the skinned control board and you will need a video driver for your 8” lcd screen. The lcd driver board was also easy to install. I bought the lcd 8” driver board off of eBay at Geeksales. This is a must have with this kit or any upgrade to the Galaga Arcade1up countercade. DIY Retro Arcade was a great help when I had any questions. They are very friendly and helpful, I would highly recommend any of their products. They don’t sell cheaply made arcade parts like some places.