A1U-CC-V2.

Inline Toggle Switch To Control LED Lights Plugs Inline Between The Power Supply and Light 1/4 Hole Size to Mount 5.5mm x 2.1mm Female / Male Ba...

1 x Female Input 3 x Male Output Barrel is standard size 5.5mm x 2.1mm

1 x Female Input2 x Male Output Barrel is standard size 5.5mm x 2.1mm

5.5mm x 2.1mm DC barrel male connection about 12 inches in length Great to use with our power supply to add a DC connection for a splitter.

5.5x2.1mm Barrel connector for quick connection to a 12v PC power supply (or remove to wire manually to hook to arcade power supply) 2 wires with...

Mount The EMI filter on the outside of the cabinet Gives interior female 110v plug Plug Surge Strip or any other standard 110v male to the...

Arcade Encoder For Sanwa Style (Complete w/Cables) Fits small 0.110" (2.8mm) Terminals and Sanwa 5 Pin Joystick1 - Arcade Encoder1 - USB Cable13 - ...

5.5 x 2.1mm barrel connector for quick connection to a 12v PC power supply (or remove to wire manually to hook to arcade power supply) 2 wires wit...

One End is a Standard 0.187" (4.8mm) Terminals Other End is a 2 Pin JST Commonly used on Encoders and Arcade1Up 12 Jumpers Per Pack

Used To Wire Two 25 Cent LED ButtonsButtons Must Be No More Then 5 Inches ApartIncludes 3 Foot Extension CablePlug and PlayWithout being hooked int...

12mm Size button Momentary - Does not stay pressed down once released requires a 0.50" hole 0.110 terminal size 3A /125VAC 1.5A/250VAC

Arcade Encoder For Happs Style (complete w/Cables) - Fits Standard 0.187" (4.8mm) Terminals1 - Arcade Encoder1 - USB cable12 - Happs Style Jumpers

1 x Female Input / Output 1 x Male Input / Output Barrel is standard size 5.5mm x 2.1mm  

Output: 12V DC (5.0A) Fits Both 5.5mm x 2.5mm or 5.5mm x 2.1mm Input: 100-260VAC 50/60Hz 60 Watt Max Works With All Pandoras Box Arcade With A De...

Total Size : 5.8 x 4.8 x 3.4cm / 2.3" x 1.9" x 1.3"(LxWxH);Plug Type : 3 Pin IEC320 C14 Hole Center Distance : 3.9cm / 1.5";Bottom Size : 4.7 x 2....

Fits Small 0.0110" (2.8mm) Terminals12 - Jumpers Only For Sanwa StyleTwo Lengths Available

Specifications: USB 2.0 Speeds Total Cable length: approx. 1 m / 3.3 ft Flush mounting 28mm hole Connector: USB A-type male to USB A-type female

3.5mm male-to-male stereo audio cable transmits audio in stereo format Works with any device equipped with standard 3.5mm audio jack or AUX-in por...

5.5x2.1mm Barrel connector for quick connection to a 12v PC power supply (or remove to wire manually to hook to arcade power supply) 2 wires with...

Direct replacement for Arcade1Up countercades V2 Made from baltic birch Includes t Molding Color Choice Includes Heavy Duty 10mil Polycarbonate. ...

Our easy LED install kit makes hooking up LED buttons a snap! Kit Includes:1 x PCB 1 x Power Switch w/ JST Connection (assorted colors, no way to p...

This cable has a sanwa style connector on one and with preinstalled terminals for the Arcade1Up 4 connector. This comes with the cable and two 4 co...

12mm Size button Latching - Locks to on or off when pushed requires a 0.50" hole 0.110 terminal size 3A /125VAC 1.5A/250VAC

This is a 100% full install kit minus the monitor or LCD driver and assorted nuts and bolts. Kit Contains: 1.  Speaker Grill Cover2. 3 Jigs3. Powe...