A1U-CC-Power.

Inline Toggle Switch To Control LED Lights Plugs Inline Between The Power Supply and Light 1/4 Hole Size to Mount 5.5mm x 2.1mm Female / Male Ba...

1 x Female Input2 x Male Output Barrel is standard size 5.5mm x 2.1mm

1 x Female Input 3 x Male Output Barrel is standard size 5.5mm x 2.1mm

5.5x2.1mm Barrel connector for quick connection to a 12v PC power supply (or remove to wire manually to hook to arcade power supply) 2 wires with...

Mount The EMI filter on the outside of the cabinet Gives interior female 110v plug Plug Surge Strip or any other standard 110v male to the...

5.5 x 2.1mm barrel connector for quick connection to a 12v PC power supply (or remove to wire manually to hook to arcade power supply) 2 wires wit...

Used To Wire Two 25 Cent LED ButtonsButtons Must Be No More Then 5 Inches ApartIncludes 3 Foot Extension CablePlug and PlayWithout being hooked int...

1 x Female Input / Output 1 x Male Input / Output Barrel is standard size 5.5mm x 2.1mm  

World Wide Input Voltage 100-240VAC 50/60Hz 12 Volt Power Supply - 2.5 Amp Standard 5.5mm (Outside barrel) x 2.5mm (Inside Barrel) Center: P...

Output: 12V DC (5.0A) Fits Both 5.5mm x 2.5mm or 5.5mm x 2.1mm Input: 100-260VAC 50/60Hz 60 Watt Max Works With All Pandoras Box Arcade With A De...

Total Size : 5.8 x 4.8 x 3.4cm / 2.3" x 1.9" x 1.3"(LxWxH);Plug Type : 3 Pin IEC320 C14 Hole Center Distance : 3.9cm / 1.5";Bottom Size : 4.7 x 2....

Need a simple way to turn off your LED buttons or Marquee? This is it! Inline unit that quickly will tie into most existing systems. Voltage:  DC ...

5.5x2.1mm Barrel connector for quick connection to a 12v PC power supply (or remove to wire manually to hook to arcade power supply) 2 wires with...

Some machines have a 3 wire power switch. Verify before purchase. If yours has 3 this kit will of course not work. We do not have a 3 wire setup ...

5.5 x 2.1mm barrel connector for quick connection to a 12v PC power supply (or remove to wire manually to hook to arcade power supply) 2 wires wit...

Includes: 1 x PCB1 x PCB Feet1 x Momentary Power Switch (random colors)1 x 18" Jumper Wire1 x 2 pin JST 5.5x2.1mm Male Power Out