A1U-CC-Conversion-Parts.

Inline Toggle Switch To Control LED Lights Plugs Inline Between The Power Supply and Light 1/4 Hole Size to Mount 5.5mm x 2.1mm Female / Male Ba...

5.5mm x 2.1mm DC barrel male connection about 12 inches in length Great to use with our power supply to add a DC connection for a splitter.

1 x Female Input 3 x Male Output Barrel is standard size 5.5mm x 2.1mm

1 x Female Input2 x Male Output Barrel is standard size 5.5mm x 2.1mm

5.5x2.1mm Barrel connector for quick connection to a 12v PC power supply (or remove to wire manually to hook to arcade power supply) 2 wires with...

Arcade Encoder For Sanwa Style (Complete w/Cables) Fits small 0.110" (2.8mm) Terminals and Sanwa 5 Pin Joystick1 - Arcade Encoder1 - USB Cable13 - ...

Mount The EMI filter on the outside of the cabinet Gives interior female 110v plug Plug Surge Strip or any other standard 110v male to the...

5.5 x 2.1mm barrel connector for quick connection to a 12v PC power supply (or remove to wire manually to hook to arcade power supply) 2 wires wit...

One End is a Standard 0.187" (4.8mm) Terminals Other End is a 2 Pin JST Commonly used on Encoders and Arcade1Up 12 Jumpers Per Pack

Used To Wire Two 25 Cent LED ButtonsButtons Must Be No More Then 5 Inches ApartIncludes 3 Foot Extension CablePlug and PlayWithout being hooked int...

Arcade Encoder For Happs Style (complete w/Cables) - Fits Standard 0.187" (4.8mm) Terminals1 - Arcade Encoder1 - USB cable12 - Happs Style Jumpers

Total Size : 5.8 x 4.8 x 3.4cm / 2.3" x 1.9" x 1.3"(LxWxH);Plug Type : 3 Pin IEC320 C14 Hole Center Distance : 3.9cm / 1.5";Bottom Size : 4.7 x 2....

World Wide Input Voltage 100-240VAC 50/60Hz 12 Volt Power Supply - 2.5 Amp Standard 5.5mm (Outside barrel) x 2.5mm (Inside Barrel) Center: P...

1 x Female Input / Output 1 x Male Input / Output Barrel is standard size 5.5mm x 2.1mm  

Output: 12V DC (5.3A) Fits Both 5.5mm x 2.5mm or 5.5mm x 2.1mm Input: 100-260VAC 50/60Hz 60 Watt Max Works With All Pandoras Box Arcade With A De...

Need a simple way to turn off your LED buttons or Marquee? This is it! Inline unit that quickly will tie into most existing systems. Voltage:  DC ...

About 12 Inches Female & Male Set 5.5mm x 2.1mm barrel connection 18 gauge wire

Fits Small 0.0110" (2.8mm) Terminals12 - Jumpers Only For Sanwa StyleTwo Lengths Available

This will provide a VGA input for your factory Arcade1Up  Countercade monitor allowing you to hook up like a 60 in 1 pcb. If you need a HDMI output...

Specifications: USB 2.0 Speeds Total Cable length: approx. 1 m / 3.3 ft Flush mounting 28mm hole Connector: USB A-type male to USB A-type female

3.5mm male-to-male stereo audio cable transmits audio in stereo format Works with any device equipped with standard 3.5mm audio jack or AUX-in por...

Our custom designed PCB will allow anyone to simply and quickly install a Pandoras Box Family Edition into a arcade cabinet. This pcb also has a 12...

This cable has a sanwa style connector on one and with preinstalled terminals for the Arcade1Up 4 connector. This comes with the cable and two 4 co...

5.5x2.1mm Barrel connector for quick connection to a 12v PC power supply (or remove to wire manually to hook to arcade power supply) 2 wires with...