A1U-34-Upgrades.

Concave Design Microswitch reliability tested to 10,000,000 cycles. Vertical attached microswitch with standard 0. 187" (4. 8mm) terminals. 28mm H...

There are 3 different cables for these joysticks. Please look at the images below and determine which cable you need. The joystick INCLUDES the cab...

Runs on 12 volt. These Fit the Standard 1-1/8" (28mm) Control Panel Button Holes. Button connection Size:2.8mm (same size as standard sanwa) We o...

Convert your Japanese style ball top joystick to the more recognized American style. This will work on: Sanwa Zippy Arcade1Up AtGames Legends  

Convent One Piece Design, not super long like other style buttons. 28mm Screw Type If you need encoder wires get them HERE

Replaces Sanwa Part Number:GT-Y This GT-Y plate is compatible with the Sanwa JLF series joysticks: JLF-TP-8YT(-SK) JLF-TP-8Y(-SK) JLF-TP-8S...

Microswitch Reliability Tested To 10,000,000 Cycles Vertical Attached Microswitch With Standard 0.187" (4.8mm) Terminals 12V or 5V. If you need en...

The 4lb tension spring can be used as a replacement for the existing spring found in the Sanwa JLF series of Joysticks. Modding your Sanwa JLF joys...

Runs on 12 volt (will not power on 5v). These Fit the Standard 1-1/8" (28mm) Control Panel Button Holes. Button connection Size:2.8mm (same size...

Runs on 12 volt. These Fit the Standard 1-1/8" (28mm) Control Panel Button Holes. Button connection Size:2.8mm (same size as standard sanwa) We o...

Plastic push button with translucent bezel Black center for Eclipse look LED holder .250" terminal size Fits wood or metal control panels Pushbu...

Runs on 12 volt. These Fit the Standard 1-1/8" (28mm) Control Panel Button Holes. Button connection Size:2.8mm (same size as standard sanwa) We ...

6MM Ball Thread.

Runs on 5 volt. Button connection Size: 0.110 (same size as standard sanwa) We offer the led harness for these in our store! Convent One Piece Des...

The 2lb tension spring can be used as a replacement for the existing spring found in the Sanwa JLF series of Joysticks. Modding your Sanwa JLF joys...

25¢ Push For Credit" graphic embedded inside the buttonMicro switch Reliability Rated at 10,000,000 cycles Package Contents: 25¢ Push Button LED 1...

Color Options Red | Blue | Yellow | White | Green | Orange | Purple This is a complete control deck upgrade kit for the Mortal Kombat Arcade1Up mac...

  Runs on 12 volt. These Fit the Standard 1-1/8" (28mm) Control Panel Button Holes. Button connection Size:2.8mm (same size as standard sanwa) We ...

Color Options Red | Blue | Yellow | White | Green | Orange | Purple This is a complete control deck upgrade kit for the Street Fighter Arcade1Up ma...

12mm Size button Momentary - Does not stay pressed down once released requires a 0.50" hole 0.110 terminal size 3A /125VAC 1.5A/250VAC

Shaft Diameter: 9mm Adds 15mm of Height Compatiable With Sanwa, Zippy, JS19 and other Joysticks That Are 9mm.

Color Options Red | Blue | Yellow | White | Green | Orange | Purple This is a complete control deck upgrade kit for the Atari 12 in 1 Arcade1Up mac...

Feature: Hard plastic, long lifespan. High quality 12v LED standard Illuminated arcade push buttons. Will work on wood or metal control panels.S...

These are replacement bulbs for our Chrome and Eclipse buttons. They will work with either 5v or 12v. Sold each.