A1U-34-Conversion-Parts.

Want To Install A Pandora's Box Or Raspberry Pi In Your Arcade1Up? Then You Need This Board! This Board Is Used To Convert The Monitor In Your Ar...

Inline Toggle Switch To Control LED Lights Plugs Inline Between The Power Supply and Light 1/4 Hole Size to Mount 5.5mm x 2.1mm Female / Male Ba...

This cable is a premade to wire between our 16A power supply to the EMI filter. Makes installing a power supply in your cabinet a breeze.

1 x Female Input 3 x Male Output Barrel is standard size 5.5mm x 2.1mm

5.5mm x 2.1mm DC barrel male connection about 12 inches in length Great to use with our power supply to add a DC connection for a splitter.

1 x Female Input2 x Male Output Barrel is standard size 5.5mm x 2.1mm

5.5x2.1mm Barrel connector for quick connection to a 12v PC power supply (or remove to wire manually to hook to arcade power supply) 2 wires with...

Mount The EMI filter on the outside of the cabinet Gives interior female 110v plug Plug Surge Strip or any other standard 110v male to the...

Arcade Encoder For Sanwa Style (Complete w/Cables) Fits small 0.110" (2.8mm) Terminals and Sanwa 5 Pin Joystick1 - Arcade Encoder1 - USB Cable13 - ...

5.5 x 2.1mm barrel connector for quick connection to a 12v PC power supply (or remove to wire manually to hook to arcade power supply) 2 wires wit...

One End is a Standard 0.187" (4.8mm) Terminals Other End is a 2 Pin JST Commonly used on Encoders and Arcade1Up 12 Jumpers Per Pack

Used To Wire Two 25 Cent LED ButtonsButtons Must Be No More Then 5 Inches ApartIncludes 3 Foot Extension CablePlug and PlayWithout being hooked int...

Arcade Encoder For Happs Style (complete w/Cables) - Fits Standard 0.187" (4.8mm) Terminals1 - Arcade Encoder1 - USB cable12 - Happs Style Jumpers

Total Size : 5.8 x 4.8 x 3.4cm / 2.3" x 1.9" x 1.3"(LxWxH);Plug Type : 3 Pin IEC320 C14 Hole Center Distance : 3.9cm / 1.5";Bottom Size : 4.7 x 2....

1 x Female Input / Output 1 x Male Input / Output Barrel is standard size 5.5mm x 2.1mm  

Output: 12V DC (5.3A) Fits Both 5.5mm x 2.5mm or 5.5mm x 2.1mm Input: 100-260VAC 50/60Hz 60 Watt Max Works With All Pandoras Box Arcade With A De...

World Wide Input Voltage 100-240VAC 50/60Hz 12 Volt Power Supply - 2.5 Amp Standard 5.5mm (Outside barrel) x 2.5mm (Inside Barrel) Center: P...

Need a simple way to turn off your LED buttons or Marquee? This is it! Inline unit that quickly will tie into most existing systems. Voltage:  DC ...

About 12 Inches Female & Male Set 5.5mm x 2.1mm barrel connection 18 gauge wire

This is the ULTIMATE stripped down bare bones "all you really need" 60 in 1 jamma harness. This will work great for you if:1. The length is 22 inch...

Fits Small 0.0110" (2.8mm) Terminals12 - Jumpers Only For Sanwa StyleTwo Lengths Available

This cable witll connect to a sanwa style joystick and to Arcade1Up board that has a 5 pin style connector. This makes a plug and play solution for...

Specifications: USB 2.0 Speeds Total Cable length: approx. 1 m / 3.3 ft Flush mounting 28mm hole Connector: USB A-type male to USB A-type female

3.5mm male-to-male stereo audio cable transmits audio in stereo format Works with any device equipped with standard 3.5mm audio jack or AUX-in por...